Sep 25
PEB Design Optimization Techniques That Save Material Cost
Table of Contents Pre-engineered building design optimization establishes the correct size for each frame, purlin, girt, and connection according to its load, rather than simply selecting standard rolled sections. The result of this correctly done work is a reduction in steel tonnage by 20 to 35 percent in comparison to…
Sep 22
Common Precast Connection Detailing Challenges and Their Solutions
Table of Contents Tolerance mismatches, restrained movements, issues with welding, problems due to corrosion, conflicts with other trades, and mistakes related to the erection procedure are the typical issues encountered in precast connection detailing. All of the problems mentioned above can be rectified through the drawings. If hardware has allowance…
Sep 19
Complete PEB Engineering Lifecycle: Design, Detailing, Fabrication, Erection and Maintenance
Table of Contents A pre-engineered building (PEB) undergoes 5 different stages before being finally constructed: planning, detailing, manufacture, erecting, and maintenance. The engineer calculates loads and determines the members’ sizes; the detailer prepares drawings for the workshop; the fabricator cuts, welds, and paints steel; the erection crew fastens it on…
Sep 18
BIM for Rebar Detailing: How 3D Models Improve Reinforcement Coordination
Table of Contents Rebar detailing in 3D means building a model of the reinforcement, bar by bar, inside the same coordinate space as the structural, architectural, and MEP models for a project. That’s what lets a detailer catch a beam-column joint where four different bar sets are trying to occupy…
